Jack Covers For Hi-Lift Jacks

When determining which size cover is best for you it does NOT matter what size jack you have; what matters is how you mount your jack. We have also provided some images below to help you determine which size is best for you.

Jack Covers are available in two standard lengths - 11" and 15" (these are the lengths of the zippers). The best length cover for your jack depends on the type of mounts you use, which jack bar holes your mounts use, and the placement of your running gear (parts of the jack the cover protects). Minor adjustments to your jack mounting setup (when possible) can allow for use of the longer cover if desired. For reference, our 11" cover is 1 hole shorter than the Hi-Lift branded neoprene cover.

The 11" version will cover 2-2.5 holes above the running gear and the 15" version will cover 8-8.5 holes above the running gear. Both sizes cover the 3 holes below the running gear. Just determine which holes on your jack bar you need for any mounting bolts and select the cover that will allow you to still have access to those holes

If you still are not sure which size is right for you feel free to contact us for some help. We don't bite!

NOTE: The best position for a horizontally mounted jack is with the nose facing up whenever possible. This allows the Jack Cover to do the best job of keeping your jack clean and dry. When possible, avoid mounting your jack/cover with the "nose" of the running gear facing down. As the zipper and zipper tape are not waterproof, some water can get past them and into the cover. Although the cover does still keep out dirt and grime when mounted nose down, it is not the most ideal position for mounting. Because some mounting situations require the jack to have the nose facing down, all of our covers are made with a grommet in the nose section to allow for water draining during extreme storms and deep water crossings. The grommet is just large enough for water to drain out when mounted nose down, but not so large that is lets much water in when mounted nose up.

• TRIPLE LAYER CONSTRUCTION - NEOPRENE/PIQUE LINER - PREMIUM MARINE GRADE VINYL SHELL
• 100% VIRGIN UV STABILIZED PIGMENTS WITH MILDEW AND ANTIMICROBIAL TREATMENT
• HEAVY DUTY #10 MARINE GRADE ZIPPER MADE FROM UV STABILIZED DUPONT DELRIN ACETAL RESIN
• HANDCRAFTED IN THE USA USING ONLY THE FINEST MATERIALS AVAILABLE
• JACKCOVERS.COM IS NOW STEP 22 GEAR - SAME GREAT JACK COVERS - NEW NAME
• 11" JACK COVER U.S. PATENT NO. D767,848 15" JACK COVER U.S. PATENT NO. D789,645

We guarantee our Jack Covers are the highest quality UV stable marine grade jack covers available. We guarantee our products will be free of defects in material and craftsmanship when they arrive. We personally inspect each and every cover for proper construction and fitment before it ships. If you receive a defective or damaged product please let us know right away and we will take care of you immediately!

Our warranty covers a 1 year period from the date of purchase, and is a common sense based policy. If your cover breaks as a result of defective materials and/or workmanship, or failure of any of the components (i.e. "our fault") we will repair or replace it. If you purposely or accidentally abuse, misuse, or fail to properly maintain your cover (i.e. "your fault") service will be on a case by case basis.

Treat your cover well, with proper care and a little common sense, and it will take care of you for many years to come!!

Examples of some things not covered include but are not limited to:
• Jack mounts, mount bolts, wing nuts, etc. digging into the cover causing wear marks or holes. Note on climbing pins: Always store your jack with the direction lever in the UP position (when direction lever is in DOWN position climbing pins protrude).
• Additional accessories, straps, etc. being tied to or near the cover causing tears or holes.
• Rips/tears caused by dropping/placing a covered jack on the ground, rocks, etc.
• Damage caused by items such as shovels, axes, spare tires, etc. mounted on or near the jack.
• Any misuse or abuse resulting in a damaged cover.